A Few Fine Gold Jewelry Design Ideas You Can Use

When given a color like light yellow, red, or blue, the beauty of sterling silver can be enhanced greatly. Fine gold jewelry design ideas, not related to gem stones or beads, exist to create some lovely pieces.

Do you know what material could help add color if you perform some adjustment such as glueing dripping onto the metal or bonding?

You can use low-tech materials but have to first mix the glue with a tick. You can beef up the results by using these materials.

Epoxy is the finished product of a 2 part mixture of resin and hardener. After you mixed it wait for few moments to make the clear plastic substance to be sturdy and glossy. Afterwards you can glue drill and sand it. A mirror like finish can be created which will be as brilliant as fifty coats of polish.

So just when do you add in the enhancing color? Here it goes. With a variety of common materials like ordinary paint, Kool-Aid, Jello, or makeup powder you can add beautiful color. Let your imagination do the works.

Layers will also work here. You can try dripping or impressing it into a sterling or copper sheet section and pour into sections right after. Another method that enhances creativity is dipping. Since Epoxy is a type of glue, be certain not to let the item touch anything else or it may get stuck in the process. You can hold it or hang it.

In any hardware store you will be able to purchase epoxy in two parts as well. It is also found in both craft and hobby shops too. Two of the popular methods of distribution are bottles and syringes. You can also buy it in large quantities if you want more than this.

But before you try using epoxy on your expensive gold jewelry, you must understand the basics about the process. The epoxy process goes quickly and is ready for use in time frames of 11 and 5 minutes. There is an array of choices for this but these two are the most common. Make sure that you will work with the material in the allotted time and that you will only produce what you think will be needed since you cannot use it the spare material again. A good place to use the chemical is provided by a disposable paper plate or bowl, or a piece of scrap paper. Do not try eating it too.

Now we move onto the second material. Try guessing this one. To give you some hints, it comes in several colors, is made from a combination of liquid and solid, it can be mixed and molded, and it is an ordinary material.

If you guessed polymer clay, then you are correct. You will find this substance in the hobby store under such names as Friendly Clay or Sculpey, and it is made of polyvinyl chloride. Strangely enough, this product does not contain any clay.

You will find a number of fun and creative uses for polymer clay. Stick the little pieces of this clay on metal sheets, if you love to craft mosaics. Sterling tubing can be used and filled with clay to create unique pieces. Liquid clays and powders can be used in a variety of ways to create different jewelry and artistic designs.

Of course, before working with polymer clay, you need to know a few things about it. You may find polymer clays differ from each other as each manufacturer produces it a little differently from the others. The clay needs to be kneaded with your hands before it can be used. There are also some who uses their creative side and place it in a baggie and sit on it. Also use the clay correctly in the way it was meant to be used. Have it preserved.

Ensure safety when you work with any of these materials. Read the precautions and don't inhale it or melt or glue anything that shouldn't be glued. But you'll have a lot of fun as you let your imagination run free in designing and trying out different projects. Be amazed at the fascinating creations you can make with these new ideas for fine gold jewelry designs.

Article Source: http://casinoarticles.us

For more information, tips and advice on Fine Gold Jewelry Design Ideas visit finegoldjewelry.org/

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated