At&t 2wire 2701hg-b Basic Dsl Wi-fi Gateway Setup

If you are reading this doc, you most likely are on the lookout for on the best way to arrange your new At&t 2wire dsl router. Throughout this doc I will be using a 2wire 2700HG-B wireless router, but this tutorial will also apply to other routers that 2wire offers At&t with. The very first thing to do when establishing your 2wire dsl router is plug the dsl filters into all of your telephone jacks, the place you plan having a telephone. On one of many dsl filters, you should see a dual filter that reads Phone and DSL/HPNA, on the side that says DSL/HPNA plug a telephone line into this port, then run the opposite end of the telephone line into the cellphone port on the again of the 2wire dsl router.

After you may have related the phone line, plug a ethernet cable into port 1 of the router, then join the opposite finish of the ethernet cable into your pc. After getting made the connections between your pc and the dsl modem, and the modem and the dsl filter. You may then plug in the energy adapter into the router, then plug the ability adapter into the wall outlet.

Once the 2wire dsl router powers up, you should see a green gentle next to energy, ethernet, and dsl. Once you see these lights flip inexperienced in your 2wire router, the subsequent that it's essential to do is open an internet browser akin to Web Explorer. After you open your net browser, you need to see a windows that resembles the one below. When you see this window, press the following button, which should then ask you to download the 2wire dsl setup tool.exe.

Once you have put in the 2wire dsl setup tool, the 2wire gateway authentication display screen ought to open, simply choose the sure button.After you could have authenticated your 2wire router, you will need to set an administrative password on your router. I recommend setting a password with higher and decrease case, with a number of numbers for safety reasons. This password will come in useful if you're trying to change settings on your 2wire router. To access the router sooner or later to vary any settings, merely type 192.168.1.254 into your internet browser.

Next you've gotten set a password to your router, click the next button to start registering your 2wire modem with At&t.After you've registered your router, learn via the settlement then click I Agree button. After you've accepted the agreement with At&t sbc yahoo dsl, you will need to create a person identify and password to your dsl account. To begin establishing your new person title and password enter you land line phone quantity that you've received from At&t.

After you've gotten created your new username and password, there shall be another progress screen, then click the finish button. After you have completed the about steps, shut down your current browser and reboot your computer, this can resolve any network problems. After you pc reboots open you net browser and being browsing the internet with your at&t 2wire dsl router.

If you are inquisitive about port forwarding in your 2wire router, open an online browser and kind in 192.168.1.254 into the URL tackle bar. After you have clicked the submit button and window resembling the one below should appear. The password that you simply created earlier for you 2wire router, will be the one you utilize right here when altering setting on your 2wire dsl router.

Article Source: http://casinoarticles.us

At&t 2wire 2700HG-B Basic Dsl Wireless Gateway Setup

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated