At&t 2wire Dsl Router - Setup 5 Static Ip Addresses

Have you ever simply bought a business dsl plan from At&t, which incorporates 5 static ip addresses and wish to learn to set them up to keep away from paying a $200 charge. The very first thing that you are going to wish to do is use out what your default gateway ip deal with is in your 2wire dsl router. The best technique to discover your default gateway ip is to go to the cmd immediate and sort in "ipconfig". Yow will discover the command immediate by going to the beginning button -> All Packages -> Accessories -> Command prompt. After the command immediate window opens, that is the place you'll sort in ipconfig. (See Instance Below) When you type in "ipconfig" you must see some results, that is the place you will discover what your default gateway. For example my default gateway is 192.168.10.

The following thing you must do is sort you default gateway handle into an online browser, akin to Web Explorer or Mozilla Firefox. After you sort your default gateway ip tackle into your web browser, you should get a screen that looks like the one below.

Once you have opened the configuration display screen on your 2wire dsl modem, you're going to wish to click on on the broadband link tab The broadband hyperlink tab is positioned close to the top of the screen.

Once you have accessed the broadband hyperlink tab, you will then click on Advanced setting located inside the broadband hyperlink tab. Inside the superior setting window, you are going to change your username slightly. What you will wish to doing is change USERNAME@sbcglobal.web to USERNAME@static.sbcglobal.net. Then click the save button. (Check with the picture under)

After a few minutes your router must be carried out configuring itself from its normal dynamic ip to a static ip. What you are going to want to do now is configure your router, so you'll be able to assign completely different static ip addresses to your totally different network devices. The very first thing you're going to do is click on on the Dwelling Community tab, situated at the top of the screen.

You are going to then click on the Superior Setting tab positioned within the Residence Network tab. As soon as you are on the advanced setting page, find the Bridge Community setting and click on enable. For the subnet masks I used 255.255.255.248. After you click save, you are then going to wish to click on on Edit Handle Allocation tab. Within the edit address allocation settings web page you are able to assign different static ip handle to your completely different servers, pc and other networked devices.

When you click save on the edit tackle allocation tab, you will now have to configure each gadget to receive a static ip address. On a home windows primarily based laptop, merely go into the command prompt window and type in "ipconfig /release" then sort in "ipconfig /renew". If you're utilizing Vista, you are going to have to run command prompt as administrator. Are you on the lookout for extra info on establishing your 2wire dsl modem.

Article Source: http://casinoarticles.us

At&t 2wire Dsl Router – Configure Static Ip Addresses Static Ip Address For Vista Network

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated