Fixing a loose sink Pop-up

There are many small challenges in bathroom plumbing that face the homeowner and that frequently get back to the plumber Here is one challenge related to the sink popup The sink pop-up is a nifty device which allows us to fill the sink with water or alternatively allow the water to drain freely; but sometimes they malfunction and are a nuisance to repair. However, except when they break, most pop-up problems can be repaired with a little time, and the proper equipment and know how. In this article, I will consider what to do when the pop up won't stay in the up position When this happens, it is a sign that the pivot nut underneath the sink is not adjusted properly. The pivot nut, which is located on the horizontal rod that connects to the vertical popup assembly, holds the horizontal bar in place. When you close the pop up, gravity wants to pull the vertical pop up assembly and the horizontal rod down But normally, the pivot nut holds the horizontal rod in place. be sure not to tighten the nut too much or the horizontal bar won't be able to move up and down and consequently the pop up will be frozen in place. You can even shatter the nut by overtightening! Before tightening the nut, it is worthwhile to take a few seconds to smear some plumber's grease or even Vaseline on the ball, nut, seat and nut threads. This will give the mechanism a nice even motion. One final note of caution, don't lose any of the parts during the repair process. Replacements are hard to find, and you might end up having to replace the whole pop-up assembly

Article Source: http://casinoarticles.us

A-1 Plumbing of Baltimore is a Baltimore plumbing company which specializes in bathroom repair . The company also provides Essex Plumber and Baltimore plumber|sewer installation|toilet instalaltion}

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated

Click the XML Icon Above to Receive Optimization Articles Via RSS!